Guidewires have been used for ages to perform image-guided procedures in the circulatory system, such as angioplasty, catheter insertion, stent placement and brain surgery. They require precise intravascular steerability for accessing difficult-to-reach anatomical locations and limiting damage inside the body. We developed an intrinsically safe design that offers physicians active endovascular access through enhanced maneuverability. This was achieved with the ingenious, ergonomic design of a guidewire and a one-hand controller that is able to steer only the guidewire’s tip.

Thanks to our partially automated scanbox we can efficiently digitize large series or batches. So, when looking for high resolution scan results for one-offs as well as serial inspection, this is our go-to system. Thanks to the adaptable set of lenses we can define the perfect resolution for your specific product or feature which needs to be captured in 3D.

AQC B.V. provides a high service level in PCB world. Especially with an increasing demand for special materials for your PCB products. Before launching a new prototype, we want to be 100% sure of a flawless and consistent performance. Want to know more about which (other) materials we can provide for you or do you need (more) advice during your PCB design project? Contact us via: sales@aqcbv.com or by Phone: +31 (0) 88-0045500.

PC-based control, the PC- and EtherCAT-based control and drive technology from Beckhoff, offers great potential for making machines and systems for the plastics processing industry work more sustainably. The software is based on the TwinCAT 3 Plastic Framework, the TwinCAT Analytics data analysis solution, and TwinCAT OPC UA for communication according to the Euromap standard. On the hardware side, for example, EtherCAT Terminals for energy data acquisition and servomotor drives play a crucial role as an alternative to hydraulic solutions. The TwinCAT 3 Plastic Framework enables seamless integration of hydraulic and electric drive technology, providing a modular and powerful control system for plastics machinery that minimizes development work while retaining the tried-and-tested openness of the Beckhoff architecture. This means that all prerequisites are in place to process plastics in a way that is as efficient and sustainable as possible, as the high-precision process control and end-to-end digitalization help to save on resources. The Plastic Framework brings together Beckhoff’s many years of expertise in plastics, seamlessly integrating important industry-specific control functions. These are complemented by a collection of industry-typical framework controls that can be seamlessly integrated into the overall solution. What’s more, Euromap/OPC UA can also be integrated with ease. The sample code included as standard for various plastics applications, such as injection molding, blow molding, and extrusion, simplifies project planning and programming.

Electro mechanical relais Solid state relais AC & DC HV DC relais PCB relais Mosfet relais

Discover the next benchmark in high-performance oscilloscopes with the Tektronix 7 Series DPO Oscilloscope, designed for engineers pushing the limits of speed, precision, and insight. With up to 25 GHz bandwidth and 125 GS/s sampling rate, the Tektronix 7 Series DPO delivers exceptional signal fidelity, enabling accurate analysis of today’s most demanding high-speed, RF, and research applications. Its advanced signal path architecture combines ultra-low noise with high effective number of bits (ENOB), allowing you to clearly resolve even the smallest signal details. A key innovation is QuietChannel™ technology, which actively compensates for signal loss and minimizes noise across the measurement chain, resulting in cleaner waveforms and more reliable results when it matters most. Engineered for productivity, the 7 Series DPO also features up to 10× faster data transfer, enabling parallel acquisition and analysis workflows, while the intuitive TekScope™ interface accelerates setup and insight. Whether you’re working on high-speed serial design, RF systems, or cutting-edge research, this oscilloscope helps you see more, measure more accurately, and move faster. 👉 Visit us at booth 3031 and experience firsthand how the new 7 Series DPO can elevate your measurements.

Will your product reliably withstand varying climatic conditions during operation or transportation? Our climatic testing services reveal the likelihood of performance loss or permanent damage under simulated climatic conditions (e.g. temperature, humidity, pressure variations, thermal shock). We are equipped with climatic chambers of different cell sizes.

EMC and RED directives require compliance with Electromagnetic compatibility in order to sell electrical and electronic products in Europe. Labo De Nayer supports a broad range of civil, telecom, military, space and automotive standards and offers a diversity of full compliant test rooms, and could even support flexible engineering measurements on site. We can offer 2 x 3 meter semi-anechoic rooms, 1 x 3m full-anechoic room, a 10 meter semi-anechoic room, and a reverberation chamber.

To respond to legal or customer imposed requirements for increased product reliability, we simulate a range of mechanical stress types. “You make it, we shake it” applies to any consumer market product, intra package equipment or even a satellite part. One way of detecting product failure is by tracing shifts in measured resonance frequencies.

The burger, a unique sandbox that focuses on ease of use, quality, durability and design. Elaborate but extremely functional, that's the story behind the bite in the burger. A beautiful design accent emerged from a technical challenge. Main ingredients of this project: design & engineering.

A sandbox: fun for the kids, but who wants that flashy blue old shell in the garden? Nobody, right? So we went looking for a solution. We designed a handy, safe and sustainable play bowl, but with a design to sink your teeth into. Literally and figuratively!

Deciso, a Dutch developer of OPNsense network equipment, offers firewall products and services. The A30/DEC4200 series is a co-creation with Batenburg Applied Technologies & Batenburg Industriële Elektronica. The product's housing and embedded mainboard stand out from related products on the market.

The ME-IO Slim is the efficient housing solution for compact controllers that require high-density front connection technology. The 18-pos. front connector makes contact directly on the PCB. With a module width of just 12 mm, the ME-IO Slim is particularly space-saving. Your advantages: - Simple module assembly with two side panels and one DIN rail fixing lever. - High connection density with 18-pos. connector with 5 mm pitch. - Ideal for price-sensitive applications due to the simple design and predefined module layout. - Machinable flaps in the CPU module allow application-specific customization. - Easy cabling in the module due to preprinted 18-pos. front connector.

Cosel's AME series includes modular power supplies of 400 and 600W (with 4 slots) as well as 800 and 1200W (with 6 slots). The power supplies are suitable for both industrial applications (EN/UL62368-1) as well as medical applications (EN60601-1 / 2*MOPP). The leakage current is less than 0.5mA and optionally, even less than 0.15mA. In addition, the output voltages have limited adjustability with a potentiometer and are adjustable up to 0VDC with an external signal. The outputs can be individually switched on/off remotely with an external signal or with the 5VDC AUX. In addition, the outputs can also be controlled together with the Global Inhibit. Finally, the outputs can be configured precisely with remote sense. AME series Cosel This series works with an intelligent fan with variable speed depending on the load and temperature. If necessary, its direction of rotation can be reversed. The series is equipped with OCP, OTP and OVP (Over Current Protection/Over Temperature Protection and Over Voltage Protection). There are also alarm signals that monitor the status of the input and output and there is the option of digital communication (via UART or PM-Bus). These modular power supplies are extremely compact and do not exceed 1U. Similar modules can be connected in a series or parallel circuit and offer a 5-year warranty.