Innovate: Early involvement through design and layout consultancy. In house knowledge on Analog, Digital, Power, High frequency design and EMI. Scale: Minimize Manufacturing Waste with design for Manufacturability and Testability (DFM & DFT), alongside environmental compliance and procurement stability Repeat : Test-equipment based on standardized test towers or standalone systems with full traceability. Customer developed testsystems approved by Page Electronica. In house development of testing sequence & boundary scan

The Enovates wallbox is an electric charging station module. A distinctive and intuitive design developed within a strict briefing and mechanically worked out to perfection.

Generates ESD pulses according to IEC 61000-4-2 and ISO 10605. Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. esd NX30 is an ESD gun to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It therefore satisifiers requirements exceeding the EN/IEC 61000-4-2 test levels and complies to automotive test applications. Features: - Air- and contact-discharge to 30 kV - Color touch panel control - Discharges up to 30 Hz - 80 easy-to-change R/C-networks and tips - Switchable Bleed-Off function - Built-in activity log - Optional battery tested to 30,000 pulses @30 kV

In automation processes often a 'error' message display is used. These display's mostly are big but simple segment display's which can be observed from a larger distance. (they are used in big production halls). Mostly these displays need a separate interface and/or controller to display the messages. We have developed a display which uses the EtherCAT Fieldbus. An Ethernet based Fieldbus which is largely used in the industry. In fact we use the EtherCAT-P version which also includes power over the 4-Wire Ethernet cable. So only a single cable is required to connect the display and to have it controlled by the central processing unit. The display itself is a matrix RGB LED display. Several sizes are possible, the standard configuration is a 400x800mm size display with a 128x256 pixels. With this graphical matrix display one is no more restricted to a 7 or 14 segment LED display.

The new ELM314x economy line of the EtherCAT measurement modules supplements the established ELM3x0x line with a lower cost 1 ksps class. This simplifies the use of the system-integrated precision measurement technology, which taps significant optimisation and efficiency potentials both in production machines and in inline test benches.

Ultra-precise, fast and robust measurement technology modules will become an even more integrated part of PC-based control solutions. The new EtherCAT measurement technology modules can be directly integrated into the modular EtherCAT communication system and combined with the extensive portfolio of more than 500 other EtherCAT Terminals. New metal housings optimise shielding and cooling in measurement technology applications. At the same time, the durable housings provide enhanced flexibility at the interface level, such as for LEMO or BNC plug connectors or for the established Push-In as a quickly customisable standard solution. Measurement accuracy of 100 ppm at 23 °C, precise synchronisation of < 1 μs, and the high sampling rate of up to 50,000 samples per second guarantee high-quality data acquisition.

At EBV Elektronik and Avnet Abacus, we support manufacturers with everything they need for their charging solutions – starting from the right hardware and software modules, to the necessary charging cables and plugs, right up to specific cloud solutions. In this special edition, you can find out more about the technology and market for charging solutions – we hope you enjoy reading it! Topics: Interface between mobility and energy sectors Standards for consistent communication From e-scooter to aircraft

When operating in hazardous, explosive environments, our ATEX enclosures are the recommended solution. These explosion-proof enclosures lead in safety, offering optimum protection for your components against gas, dust, and water ingress. They are available in various temperature classes and dust/gas protection ranges, tailored to the material, installed components, and environment. Executions: * Ex empty enclosures for individual assemblies with electronics and electromechanics * Ex e / ia junction boxes for distribution of electricity * Ex control stations as individually configurable on-site control units * Flameproof Ex d enclosure systems * Ex accessorie

The Expert Vibro offers a complete solution for measurements of vibrations on up to 16 channels simultaneously, online analysis and alarm generation on events.

E.D.&A. developed a battery/transmitter unit that is applied as a predictive maintenance sensor for pumps (in hazardous areas such as chemical plants or refineries). Via this ATEX certified module incl. housing, the vibrations, the sounds and the temperatures of the pumps are monitored and logged. This makes it possible, for example, to recognise early on that the bearings of the pumps need replacing and to schedule maintenance in time (predictive maintenance). In view of the strict ATEX standards, we had to take account during development of very strict requirements in terms of heat generation (strongly limited currents, inductances, capacities, possible spark formation, etc.), materials used, type of housing, type of batteries, etc. Upon delivery, we also provide a very detailed technical documentation package with the electronics.

More power for demanding applications with the SXR family Designed for even greater flexibility and a wide range of applications: The new 1218 SXR and 1228 SXR DC motors. These models expand FAULHABER’s proven DC motor portfolio and set new standards in performance and versatility for miniature drive systems. The new SXR motors offer standard higher performance and a broader range of configuration options to meet the demands of modern drive solutions. They provide flexible voltage variants from 3V to 18V as well as different bearing configurations. Additionally, the motors can be customized – from front and rear shaft modifications to options for vacuum and temperature environments. The optimized rotor balancing ensures longevity and smooth operation. At the core of the new SXR family is the innovative hexagonal coil with a high copper filling factor and straight wiring. This technology delivers significantly enhanced performance and efficiency compared to traditional pin coils. Additionally, a new magnet grade improves magnetic induction amplitude and temperature stability. Compatible and flexible for various applications All components in the SXR series are RoHS compliant, and the electrical connections offer flexible configuration options. The main markets for this product line include high-tech industries that rely on quality, reliability, and an outstanding power-to-volume ratio. These include sectors such as prosthetics, surgical tools, metrology, semiconductor processing, and automation solutions. The new SXR models are compatible with a wide range of FAULHABER products, such as the new FAULHABER planetary gearheads 14GPT. They provide various solutions: diameter-compliant, high-performing and compact at competitive prices—ideal for applications requiring the highest levels of precision and reliability.

Integrated drive technology for dynamic, human-like movements Into the future of drive technology with new dimensions and features for robotics: The new BXI is the most powerful integrated drive system in the FAULHABER portfolio thus far and was developed to meet new requirements of modern robotic applications. Human-like movements place extremely high demands on precision, force and dynamics–from delicate grip movements to powerful, coordinated joint movements. This is where the FAULHABER BXI steps in. The internal rotor motor of the 9317 BXI G series combines robustness and exceptional compactness and defines new standards for integrated drive systems in robotics. With a maximum torque of up to 20 Nm, it enables dynamic movements, fast reaction times and a highly precise movement control. The motor covers a voltage range of up to 50 V and, thanks to the available interfaces and an installation length of just 34 mm, is easy to integrate in existing system architectures. The BXI is thereby especially well suited for applications in which every millimeter, every gram and–above all–high power density are decisive, e.g., as a compact joint drive in humanoid robots. Maximum performance with minimum space requirements The drive system forms a functional unit made up of motor, integrated stepped planetary gearhead and high-resolution encoder. Its special strength lies in the systematic integration: maximum performance with minimum space requirements. The flat aluminum housing offers corrosion resistance and also supports optimized thermal dissipation. The internal rotor construction with 21 pole pairs, grooved stator and iron-core winding ensures a low cogging torque and a high torque density. The integrated absolute encoder with 15-bit SSI, line driver and compensation algorithm performs the precise positioning, is resistant to interference and makes a significant contribution to the reliability and accuracy of the entire system.

End-of-life products Do you need help sourcing the right (EOL) embedded computer boards and/or power supplies? Parhelia is able to assist you in cooperation with our global certified network. Repair Service In the event of a technical failure, required update, configuration changes, or any other changes that need to be made on your new or older products, we at Parhelia offer an RMA service.